Product description
News subscribe
Signing, you will be able to get the most fresh information about Ecobond
Physical Properties
Mechanical Properties
*The values of parameters shown in the table refer only to the sample lot tested
Test of PVDF Coating
Product Tolerance
Composite panels are manufactured with the following size tolerances.
Thicknesses 3 and 4 mm: ±0,1 mm
Width: 1250 mm -0/+3 mm
1500 mm -1/+3 mm
Length: ≤4500 mm -0/+3 mm
>4500 and ≤6100 mm -1/+4 mm
Maximum diagonal difference for the length:
≤4500 mm 4 mm
>4500 and ≤6100 mm 5 mm
Mechanical Properties
*The values of parameters shown in the table refer only to the sample lot tested
Test of PVDF Coating
Product Tolerance
Composite panels are manufactured with the following size tolerances.
Thicknesses 3 and 4 mm: ±0,1 mm
Width: 1250 mm -0/+3 mm
1500 mm -1/+3 mm
Length: ≤4500 mm -0/+3 mm
>4500 and ≤6100 mm -1/+4 mm
Maximum diagonal difference for the length:
≤4500 mm 4 mm
>4500 and ≤6100 mm 5 mm
© 2008 Ecobond All rights reserved. Any reproduction and use of materials
(fully or partially) a site is forbidden without written permission from the copyright
(fully or partially) a site is forbidden without written permission from the copyright